galvanized steel powder coated fencing panel

1 To be installed and assembled by yourself 2 Concise and simple with high strength 3 Cost effective 4 10 years' warranty

1. BRIEF INTRODUCTION

AMYFENCE, good qulity galvanized steel fence (Model A ),is the most traditional assembling fence ,you can install and assemble them all by yourself. However ,its' very popular becaluse of the excellent perforamce of Anti-ultraviolet ,anti-corrosion ,rust proof and wethering resistance ability.

Besides these ,the traditioanl concise and simple structure desgign makes it is affordable for every familay garden or industrial sites .It is widely applied to garden enclosure ,residential surrounding ,factory or wrokshop perimeter wall  ,road two sides ,airport,highwayside barrier ,building camp's temporary enclousure, etc.

2. ADVANTAGES & FEATURES    

Material: Galvanied hot-dipped zinc steel tubeAccording to customers drawing ,signing or requirements.Colors: All RAL colors are availableGuarantee: 10 years' warranty Installation : Assembling way ,or by yourself.Cost : The concise and simple design make it Lower cost than other design.Size of horizontal rails, Vertical bars , Posts , spacing is optional according to customers' requirement.Anti-corrosion and rust proof :Hot dipped zinc +Rich zinc Phosphatization+ Epoxy powder coating+Polyester Color Powder coating, which all these 4 layer's surface make our 10 years' quality warranty under normal using conditions.

3.SPECIFICATIONS      

Normal Post   size	50*50*1.5mm    60*60*1.5mm  75*75*1.8mm	Another size is available according to customers drawings or fence design requirements
Normal Horizontal Rail	35*35*1.2mm 40*40*1.2mm 45*45*1.5mm	Another size is available according to customers drawings or fence design requirements
Normal Vertical Bar	16*16*1.0mm 19*19*1.0mm 25*25*1.2mm	Another size is available according to customers drawings or fence design requirements

 

4.STRUCTURES

Horizontal Rails(2 pcs) + Vertical Tubes+Square Posts

5.SURFACE PROCESSING

6. TECHNICAL STANDARDS

Raw materials standard

NO.	PERFORMED STANDARD	NAME OF RAW MATERIALS
1	GB700-88	CARBON STRUCTURAL STEEL
2	GB704-88	HOT ROLLED FLAT BAR
3	GB709-88	HOT ROLLED STEEL SHEET
4	GB708-88	COLD ROLLED STEEL SHEET
5	GB3280-92	COLD ROLLED STAINLESS STEELSHEET

  Galvanized coating & Poyester color coating Standard.

ITME	DESCRIPTION	STANDARD REQUIREMENT	QUOTED              TEST STANDARD
GALVANIZED COATING	APPEARANCE	Accepted appearance shall be free from nodules, Blisters, roughness,sharp points and uncoated areas	ASTM A787-G90   GB/T 13912-2002
	COATING  THICKENSS	Accessories shall be up to 375 g/m2 (Average 26-30 μm), posts, horizontal rails shall be up to 275 g/m2  (Average  26-30 μm)
POLYESTER  POWDER  COATING	APPERANCE	Appearance shall be smooth and shiny, firmly adhered, basically neat, without obvious uneven,density impurity , no toughness feeling of hand touch, steel exposure ,buuble, pin hole, obvious trace are not allowed.
	COATED   THICKNESS	Bottom layer: 40μm~60μm ;  Surface layer:40μm~60μm	GB/T 13452.2-92
	SPECULAR  GLOSS	High gloss >85%    55%<Semi-gloss<75%      Low gloss <30%	ASTM D523-1999
	IMPACT RESISTANCE	50kg.cm	ASTM D2794-1999
	FLEXIBILITY	≤3mm	ASTM D522-2011
	PENCIL HARDNESS	≥2H	ASTM D3363-00
	ADHESION	Not less than grade 1	ASTM DD3359-97
	SALT SPARY       RESISTANCE	3500 hours ,Grade 1	ASTM B117-97
	HUMIDITY          RESISTANCE	3500 hours ,Grade 1	ASTM D2247-99
	WEATHERING      RESISTANCE	1000 hours ;Gloss loss :Grade 1;Discoloring :Grade 1	GB/T 1865-1997

 7.  PROJECT CASES & PRODUCT DETAILS

    WORKSHOP & PROCESSING

OUTERSIDE VIEW

Our factory view from outerside 

 

INSIDE VIEW

Our factory view from inside. 

  

CLEANING ,DEGERASE,PHOSPHATIZATION PRE-TREATMENT OF WORKPIECES       

Degrease pool         : Dissolve the press oil of the raw materials which will be sure the galvanizing quality.

Phosphatization pool: Enhance the adhesive property of the workpieces which make the color powder is more 

                                   Easily adhere to the metal surface so that make sure the long-term anti-corrosion , rust-                                   proof  and  no powder Color peel off . 

Cleaning pool          : Clean the surface of the workpiece by water spraying processing. 

PUNCHING MACHINES & DRILLERS 

All these machines are used in cutting the designed size and drilling the holes accordind to the darwings. 

POWDER COATING PRODUCTION LINE 

Advanced powder coating line is effectively make 10 years anti-corrosion and rust-proof promise. 

MOULD PROCESSING 

These machines are used to manufacture the connection accessories and another designed fitting parts. 

FOLDING & BENDING EQUIPMENT 

To fold the designed shaped semi-products according to drawing. 

 WIRE MESH AUTO-WELDING PRODUCTION LINE 

To weld the wire mesh panel automatically. 

galvanized steel powder coated fencing panel